Energy Bill Concerns

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Available capacities in kBtu/h: 06, 09, 12, 15, 18
• 100% heating at 5° F
• Hyper-heating performance down to -13° F outdoor ambient
• Double-vane air delivery for enhanced circulation
• 3D i-see Sensor™
• Infrared human sensing technologies to measure location of human heat signatures
• Multi-function wireless controller
• Cleaner air with washable anti-allergen filters

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 06, 09, 12, 15, 18
• 100% heating at 5° F
• Hyper-heating performance down to -13° F outdoor ambient
• Double-vane air delivery for enhanced circulation

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Installs quickly and easily, without the need for major construction and remodeling
• Realizes maximum control and energy efficiency by cooling and heating only those spaces in use
• Comfort control of temperature, fan speed, and air direction in each room via kumo cloud® or other smart home devices
• Cleaner air with washable anti-allergen filters
• Provides instant warmth even in extreme climates (down to -13° F)
• Maximizes energy savings by using only the energy needed to perfectly cool or heat an area
• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Auto restart and auto cooling/heating changeover

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Auto restart and auto cooling/heating changeover
• Compatible with kumo cloud® control app and Thermostat Interface
• All GL models ENERGY STAR® certified
• 14.5 – 24.6 SEER, 8.2 – 12.8 HSPF, INVERTER-driven compressor

Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven compressors and electronic LEVs provide higher efficiency with controlled power usage.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24
• Anti-mold filter
• Heating operation range: -4° F – 75° F
• Cooling operation range: 14° F to 115° F
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices

With the MX PH Series multi-zone standard and H2i® systems, you can enjoy ideal levels of comfort in the rooms you use most while reducing energy costs. Each zone operates independently. People in different rooms — like the kitchen, master bedroom or living room — can set temperatures for personalized comfort.

• Mix and match flexibility of indoor unit styles and combinations
• Four-ton and five-ton outdoor unit can support up to eight indoor units using branch boxes
• New five-ton outdoor unit for large residential home applications
• Auto restart following a power outage
• Self-check function offering integrated diagnostics
• Flexible options to tackle the most challenging multi-room installations
• High-efficiency, multiple ENERGY STAR® combinations

The MSZ-EF Designer Series wall-mounted units combine the ultimate in aesthetic standards with the most innovative cooling and heating technology. Available in four capacities, they are perfect for almost any size room. The three available model colors and sleek design allow seamless integration into interior architecture and décor. Their whisper-quiet operation enables the units to be used in noise-sensitive residential properties and work spaces as well. And, last but not least, the environment can breathe a sigh of relief: these Designer Series wall-mounted units are extremely energy efficient.

• Available capacities in kBtu/h: 9, 12, 15, 18
• Three colors to choose from: glossy white, matte silver and glossy black

The indoor unit is powered by the outdoor unit and should a power outage occur, the system is automatically restored when power returns.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24
• Heating operation range: -4° F – 75° F
• Provides instant warmth even in extreme climates (down to -13° F)
• Cooling operation range: 14° F to 115° F

These large capacity standard wall-mounted units have Wide Airflow capabilities to ensure air reaches every corner of a room and includes the Powerful Mode feature for rapid cooling and heating. Options include a single-zone, cooling only model for climates where heating is unnecessary.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Offers a wide vane for a wider angle of airflow, 150° from left to right
• Motorized vertical vanes on GL24/D30/D36 models
• Installs quickly and easily, without the need for major construction and remodeling
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices
• Cleaner air with washable anti-allergen filters

We offer solutions for every need, including situations where heating is not necessary. The ST Series of air conditioners is ENERGY STAR® certified and offers up to 24.6 SEER.

• Available capacities in kBtu/h: 09, 12, 15, 18, 24, 30, 36
• Compatible with the MSY indoor unit
• Installs quickly and easily, without the need for major construction and remodeling
• Realizes maximum control and energy efficiency by cooling and heating only those spaces in use
• Installs quickly and easily, without the need for major construction and remodeling
• Comfort control of temperature, fan speed, and air direction in each room or zone via kumo cloud® or other smart home devices

The extraordinary Trane Hyperion™ air handler represents a substantial advance in air handling technology. Using 14 industry-exclusive patents, the Hyperion offers significant advantages over other air handlers, advantages like refrigerator-styled insulation made without exposed fibrous material, which virtually eliminates sweating and condensation as well as helping create a safer environment for your home.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Quick-turn fasteners
• No leak drain pan made from rust-resistant composites and built with a gradual slope
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

More speeds, more comfort This system gives you comfort by running at the speed your home needs to stay comfortable. This allows the variable speed compressor, outdoor fan, and indoor fan to vary their speed as the temperature outside changes, slowing down or speeding up gradually when needed.

• Variable-speed fan motor
• Woven Spine Fin™ coil
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

Helping to circulate better air, the Hyperion™ air handler is built unlike anything the market has ever seen. For one thing, it's constructed more like a refrigerator, with insulation between the double walls of the uniquely designed cabinet.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

Great for smaller spaces Designed with limited space in mind, this unit can fit in tight spaces and smaller homes. We recommend this type of unit for condos or if you’re looking to fit a heat pump under your deck.

• Refrigerant Lines – Maximum length of 150 feet and 50 feet of rise
• Integrated Diagnostics with Display (CDA) – simplifies install, setup and service
• Copper Tube/Aluminum fin coils – Epoxy coated coils available for seacoast installations
• TruComfort™ Technology – provides 300 to 700 stages or speeds (varies by tonnage)
• Maximum depth of 18 inches – Perfect for Zero Lot Line applications and improves curb appeal

The TEM4 air handler combines affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. For small area applications, this affordable air handler meets or exceeds all standard efficiency requirements.

• The TMM and GMU/V air handlers are Upflow Only for use in wall, stud, or over the water heater applications.
• Standard convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

Choose your speed Two-stage heat pumps use in two speeds to keep your home comfortable all year long. Our two-speed units provide an excellent mix of value, comfort, and efficiency.

• Spine Fin™ Coil
• WeatherGuard™ top

Reliably built With its heavy gauge steel cabinet, powder paint finish, and composite blower housing the P-Series modular blower is designed to keep you comfortable year after year.

Comfort at a great value The XR15 has a SEER2 rating of 15.6 and HSPF2 up to 8.1, which makes it a great choice for an energy efficient home.

• Copper tube aluminum fin coil
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• DuraTuff™ rust-proof basepan

The extraordinary Trane Hyperion™ air handler represents a substantial advance in air handling technology. Using 14 industry-exclusive patents, the Hyperion offers significant advantages over other air handlers, advantages like refrigerator-styled insulation made without exposed fibrous material, which virtually eliminates sweating and condensation as well as helping create a safer environment for your home.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Unique modular design
• Quick-turn fasteners
• No leak drain pan made from rust-resistant composites and built with a gradual slope
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

With Trane TruComfort™ variable speed technology, the XV20i continuously adjusts its speed to meet the temperature you desire. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Compressor Sound Insulator
• Woven Spine Fin coil
• Variable-speed fan motor
• Swept fan blade
• ComfortLink II capability
• Simplified Two-Wire Connection

Helping to circulate better air, the Hyperion™ air handler is built unlike anything the market has ever seen. For one thing, it's constructed more like a refrigerator, with insulation between the double walls of the uniquely designed cabinet.

• Uniquely designed cabinet
• Fully enclosed insulation
• All-aluminum coil
• Heating options for either hydronic or electric heat
• Corrosion-resistant finish

With Trane TruComfort™ variable speed technology, the XV18 Variable Speed Air Conditioner continuously adjusts its speed to meet the temperature you want. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Variable-speed fan motor
• Compressor Sound Insulator
• Woven Spine Fin™ coil
• Simplified Two-Wire Connection
• Swept fan blade
• ComfortLink™ II capability

The TEM4 air handler combines affordability and flexibility to work with the complete range of Trane heating and cooling products. So you get the reliability of Trane and the options to work within your specific system and budget. For small area applications, this affordable air handler meets or exceeds all standard efficiency requirements.

• The TMM and GMU/V air handlers are Upflow Only for use in wall, stud, or over the water heater applications.
• Standard convertible line
• Galvanized steel cabinet
• Optional electric heat
• All-aluminum coil
• No-rust polymer drain pan
• Cooling and heat pump systems available

The 16.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Spine Fin™ coil
• Upgraded fan motor
• Full-side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

Reliably built With its heavy gauge steel cabinet, powder paint finish, and composite blower housing the P-Series modular blower is designed to keep you comfortable year after year.

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

With durable components assembled into one cabinet, the XL15c packaged heat pump system delivers exceptional heating, cooling and quiet operation, all at the same elevated efficiency you expect from Trane.

• Variable-speed indoor blower motor
• Single phase only
• Composite Vortica™ blower
• Tough corrosion and UV-resistant paint
• Demand defrost
• Ultra quiet

The Trane XR13.4c heat pump package unit features an electric heat pump combined with a powerful airflow system to make sure every corner of your home will be efficiently comfortable.

• All-Aluminum Spine Fin™ Coil
• Tough corrosion and UV-resistant paint
• Advanced Vortica™ blower motor
• Rugged, all-steel cabinet
• Electronic Demand Defrost
• Advanced airflow system for quiet and efficient outdoor operation

Every Trane packaged unit is designed with high-quality components. Each helps ensure that time after time, your all-in-one heating and cooling units will provide total comfort your family can rely on.

• Appliance-Grade Finish
• Electronic Demand Defrost
• Direct-drive two-speed blower motor

The XR13.4c packaged system air conditioner carries an SEER2 rating of 13.4, meaning it can deliver cool air throughout your home in a quick and efficient manner.

• All-Aluminum Spine Fin™ Coil
• Durable Weather-Beater Top
• Appliance-Grade Finish

Communicating technology in a fully modulating furnace for the ultimate comfort and greater efficiency. The advanced ComfortLink™ II allows the XC95m to constantly calibrate itself for optimal performance year after year.

• ComforLink™ II capability
• Three-wire connections
• Continuous Comfort-R™ mode
• Single or two pipe vent options
• Silicon nitride igniter
• Variable-speed draft inducer
• Certified to 2% air leakage

With Trane TruComfort™ variable speed technology, the XV20i continuously adjusts its speed to meet the temperature you desire. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Compressor Sound Insulator
• Woven Spine Fin coil
• Variable-speed fan motor
• Swept fan blade
• ComfortLink II capability
• Simplified Two-Wire Connection

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

With Trane TruComfort™ variable speed technology, the XV18 Variable Speed Air Conditioner continuously adjusts its speed to meet the temperature you want. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Variable-speed fan motor
• Compressor Sound Insulator
• Woven Spine Fin™ coil
• Simplified Two-Wire Connection
• Swept fan blade
• ComfortLink™ II capability

The S9X1 furnace offers a high-efficiency constant torque ECM blower motor for comfort in cold weather, while maintaining the DNA that Trane is known for: quality and reliability. The S9X1 is rated at up to 96% gas efficiency (AFUE), providing energy savings and a consistent flow of warm, comfortable air in both winter AND summer.

• Self-diagnostic integrated furnace control board (IFC)
• Matches with single- and two-stage AC and HP for more system options
• Sealed combustion, 100% outside air option
• Multi-port, in-shot burners
• Tubular, stainless steel primary heat exchanger
• Patented Vortica™ II blower design
• Pre-painted galvanized steel cabinet
• Fully insulated for quiet operation

The 16.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Spine Fin™ coil
• Upgraded fan motor
• Full-side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

No matter what the temperature might be outside, the two-stage S8X2 gas furnace is designed to provide a consistent, predictable flow of warm air to keep your family comfortable all winter long.

• Microelectronic controller
• Heavy steel cabinet
• Durable silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Tubular steel heat exchanger
• Pre-painted galvanized steel cabinet
• Insulated cabinet for quiet operation

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

Communicating technology in a fully modulating furnace for the ultimate comfort and greater efficiency. The advanced ComfortLink™ II allows the XC95m to constantly calibrate itself for optimal performance year after year.

• ComforLink™ II capability
• Three-wire connections
• Continuous Comfort-R™ mode
• Single or two pipe vent options
• Silicon nitride igniter
• Variable-speed draft inducer
• Certified to 2% air leakage

More speeds, more comfort This system gives you comfort by running at the speed your home needs to stay comfortable. This allows the variable speed compressor, outdoor fan, and indoor fan to vary their speed as the temperature outside changes, slowing down or speeding up gradually when needed.

• Variable-speed fan motor
• Woven Spine Fin™ coil
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

Great for smaller spaces Designed with limited space in mind, this unit can fit in tight spaces and smaller homes. We recommend this type of unit for condos or if you’re looking to fit a heat pump under your deck.

• Refrigerant Lines – Maximum length of 150 feet and 50 feet of rise
• Integrated Diagnostics with Display (CDA) – simplifies install, setup and service
• Copper Tube/Aluminum fin coils – Epoxy coated coils available for seacoast installations
• TruComfort™ Technology – provides 300 to 700 stages or speeds (varies by tonnage)
• Maximum depth of 18 inches – Perfect for Zero Lot Line applications and improves curb appeal

The S9X1 furnace offers a high-efficiency constant torque ECM blower motor for comfort in cold weather, while maintaining the DNA that Trane is known for: quality and reliability. The S9X1 is rated at up to 96% gas efficiency (AFUE), providing energy savings and a consistent flow of warm, comfortable air in both winter AND summer.

• Self-diagnostic integrated furnace control board (IFC)
• Matches with single- and two-stage AC and HP for more system options
• Sealed combustion, 100% outside air option
• Multi-port, in-shot burners
• Tubular, stainless steel primary heat exchanger
• Patented Vortica™ II blower design
• Pre-painted galvanized steel cabinet
• Fully insulated for quiet operation

Choose your speed Two-stage heat pumps use in two speeds to keep your home comfortable all year long. Our two-speed units provide an excellent mix of value, comfort, and efficiency.

• Spine Fin™ Coil
• WeatherGuard™ top

No matter what the temperature might be outside, the two-stage S8X2 gas furnace is designed to provide a consistent, predictable flow of warm air to keep your family comfortable all winter long.

• Microelectronic controller
• Heavy steel cabinet
• Durable silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Tubular steel heat exchanger
• Pre-painted galvanized steel cabinet
• Insulated cabinet for quiet operation

Comfort at a great value The XR15 has a SEER2 rating of 15.6 and HSPF2 up to 8.1, which makes it a great choice for an energy efficient home.

• Copper tube aluminum fin coil
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• DuraTuff™ rust-proof basepan

Communicating technology in a fully modulating furnace for the ultimate comfort and greater efficiency. The advanced ComfortLink™ II allows the XC95m to constantly calibrate itself for optimal performance year after year.

• ComforLink™ II capability
• Three-wire connections
• Continuous Comfort-R™ mode
• Single or two pipe vent options
• Silicon nitride igniter
• Variable-speed draft inducer
• Certified to 2% air leakage

The S9V2-VS furnace is a high efficiency two stage furnace that achieves 97% gas efficiency (AFUE). It features both a variable speed draft inducer and our patented Vortica™ II variable speed blower motor, to bring you and your home comfort and efficient performance

• Variable-speed ECM blower motor
• Variable-speed draft inducer
• Comfort-R™ mode
• Single or two pipe vent options
• 40-120 mbth input
• Two-stage heat
• Fully insulated/gasketed
• Silicon nitride ignitor
• Standard 34″ height
• IFC boatd with digital configuration, status and fault codes
• Certified to 2% air leakage

The S9X1 furnace offers a high-efficiency constant torque ECM blower motor for comfort in cold weather, while maintaining the DNA that Trane is known for: quality and reliability. The S9X1 is rated at up to 96% gas efficiency (AFUE), providing energy savings and a consistent flow of warm, comfortable air in both winter AND summer.

• Self-diagnostic integrated furnace control board (IFC)
• Matches with single- and two-stage AC and HP for more system options
• Sealed combustion, 100% outside air option
• Multi-port, in-shot burners
• Tubular, stainless steel primary heat exchanger
• Patented Vortica™ II blower design
• Pre-painted galvanized steel cabinet
• Fully insulated for quiet operation

No matter what the temperature might be outside, the two-stage S8X2 gas furnace is designed to provide a consistent, predictable flow of warm air to keep your family comfortable all winter long.

• Microelectronic controller
• Heavy steel cabinet
• Durable silicon nitride hot surface igniter
• Multi-port, in-shot burners
• Tubular steel heat exchanger
• Pre-painted galvanized steel cabinet
• Insulated cabinet for quiet operation

The XL15c gas/electric HVAC system delivers exceptional heating and cooling all while operating quietly and efficiently. With durable components assembled into one cabinet, this gas/electric HVAC system is designed to meet all of your home heating and cooling needs.

• 2-stage gas heat
• Variable-speed indoor blower motor
• Comfort-R™ mode
• Spine Fin™ condenser
• Ultra quiet
• Tough corrosion and UV-resistant paint
• Single phase only
• All stainless steel heating system

Stay comfortable with a stainless steel heating unit that doubles as an air conditioner.

• Composite Vortica™ blower will deliver the sustained performance you expect season after season
• All stainless steel heating system
• Tough corrosion and UV-resistant paint
• Single phase only

The beauty of the XL15c EarthWise® Hybrid system is that it can handle any temperature requests. With a high-efficiency heat pump working in mild to hot climates, and a dual-stage furnace working in cold climates, this system can handle whatever temperature you might wake up to each day.

• State of the art fan system
• Stainless Steel heat exchanger and burners

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

With Trane TruComfort™ variable speed technology, the XV20i continuously adjusts its speed to meet the temperature you desire. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Compressor Sound Insulator
• Woven Spine Fin coil
• Variable-speed fan motor
• Swept fan blade
• ComfortLink II capability
• Simplified Two-Wire Connection

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

With Trane TruComfort™ variable speed technology, the XV18 Variable Speed Air Conditioner continuously adjusts its speed to meet the temperature you want. It gradually slows down or speeds up to deliver a consistent flow of cool, comfortable air.

• Variable-speed fan motor
• Compressor Sound Insulator
• Woven Spine Fin™ coil
• Simplified Two-Wire Connection
• Swept fan blade
• ComfortLink™ II capability

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

The 16.2 SEER2 rating makes this air conditioner energy-efficient while providing home comfort.

• Spine Fin™ coil
• Upgraded fan motor
• Full-side louvered panels protect your investment
• Corrosion-resistant Weatherguard™ fasteners
• Unique DuraTuff™ non-corrosive base pan
• Quick-Sess cabinet with full coil protection

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition

The 14.8 SEER2 rating balances energy efficiency and cooling strength to help lower your home cooling costs.

• Spine Fin™ coil

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

More speeds, more comfort This system gives you comfort by running at the speed your home needs to stay comfortable. This allows the variable speed compressor, outdoor fan, and indoor fan to vary their speed as the temperature outside changes, slowing down or speeding up gradually when needed.

• Variable-speed fan motor
• Woven Spine Fin™ coil
• Swept fan blade
• Compressor sound insulator
• ComfortLink™ II capability
• Two-wire connections

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Great for smaller spaces Designed with limited space in mind, this unit can fit in tight spaces and smaller homes. We recommend this type of unit for condos or if you’re looking to fit a heat pump under your deck.

• Refrigerant Lines – Maximum length of 150 feet and 50 feet of rise
• Integrated Diagnostics with Display (CDA) – simplifies install, setup and service
• Copper Tube/Aluminum fin coils – Epoxy coated coils available for seacoast installations
• TruComfort™ Technology – provides 300 to 700 stages or speeds (varies by tonnage)
• Maximum depth of 18 inches – Perfect for Zero Lot Line applications and improves curb appeal

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Choose your speed Two-stage heat pumps use in two speeds to keep your home comfortable all year long. Our two-speed units provide an excellent mix of value, comfort, and efficiency.

• Spine Fin™ Coil
• WeatherGuard™ top

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition

Comfort at a great value The XR15 has a SEER2 rating of 15.6 and HSPF2 up to 8.1, which makes it a great choice for an energy efficient home.

• Copper tube aluminum fin coil
• Baked-on powder paint
• Corrosion-resistant Weatherguard™ fasteners
• DuraTuff™ rust-proof basepan

For that gentle warmth you want when there's a chill in the air, the XV80 high efficiency oil furnace provides two stages of comfort all winter long.

• Heavy duty, 13 gauge hot-rolled steel heat exchanger
• Ceramic fiber combustion chamber that heats up quickly and provides more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition
• Heavy gauge, two-tone powder-painted cabinet
• Increased dehumidification with Comfort-R™

Oil heaters for the home are known for their dependable warmth even in the coldest winters. And the Trane XP80 oil-fired furnace can match that comfort with reliable, efficient performance.

• Heavy duty, hot-rolled steel wrap-around heat exchanger
• Ceramic fiber combustion chamber - heats up quickly to provide more complete combustion
• Beckett flame retention burner for smooth, quiet and cleaner ignition